Vibratory Feeders,Automation Machines,Bowls,Feeders,Supply Hoppers

Straight-Front Supply Hoppers

Straight-front supply hoppers are similar to standard supply hoppers except for the straight front, larger bin opening, and wider tray. These modifications allow for the controlled feeding of parts that flow easily and are up to approximately three inches long.

For this hopper style, the total weight of parts being fed should not exceed 30 pounds. Other models are available for heavier and larger parts and parts that tend to tangle. Various models of supply hoppers and elevating conveyors can be customized to solve most bulk feeding requirements.

These hoppers are fabricated from 11-gauge 304 stainless steel and are heli-arc welded. All welds are ground and polished so there are no pits or seams. These supply hoppers can be mounted on height-adjustable floor pedestals.



Model Number

Capacity Cu. Ft.

Width
W

Length
L

Height
H

Extension
E

Depth
D

Weight Lbs.*

FHO-1/2

1/2

12

18

9

9 1/8

-

110

FHO-1

1

14 1/4

19 1/2

10 3/4

-

130

FHO-2

2

14 1/8

25 1/8

15 3/4

15 1/2

-

145

FHO-3

3

20 1/4

25 1/4

18 3/4

-

165

FHO-4

4

25 1/8

30 3/4

22

3/4

180

FHO-5

5

24 1/4

3

200

FHO-6

6

26 1/2

5 1/4

215

* Add approximately 120 pounds for floor pedestals. Low profile models are also available.
These units run on rectified current from a 115 or 230 volt, 50 or 60-hertz single-phase power supply. The maximum amperage at 115 VAC is 7 amps.